+1 500 000 products in offer
6000 packages per day
+300 000 clients from 150 countries
Manufacturer: PEAKTECH
Manufacturer | PEAKTECH | |
Type of meter | digital multimeter | |
Measurement | AC current, AC voltage, capacitance, continuity, DC current, DC voltage, frequency, inductance, resistance, temperature (external probe required) | |
Kind of display used | LCD | |
Display parameters | 3,5 digit (1999) | |
DC voltage measuring range | 200mV/2V/20V/200V/1kV | |
DC voltage measuring accuracy | ±(0.5% + 3 digit) | |
AC voltage measuring range | 200mV/2V/20V/200V/1kV | |
AC voltage measuring accuracy | ±(0.8% + 5 digit) | |
DC current measuring range | 2mA/20mA/200mA/10A | |
DC current measuring accuracy | ±(0.8% + 3 digit) | |
AC current measuring range | 2mA/20mA/200mA/10A | |
AC current measuring accuracy | ±(1% + 5 digit) | |
Resistance measuring range | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/2GΩ | |
Capacitance measuring range | 20nF/200nF/2µF/20µF/200µF | |
Capacitance measuring accuracy | ±(2.5%+ 20 digit) | |
Inductance measuring range | 2mH/20mH/200mH/2H/20H | |
Inductance measuring accuracy | ±(2.5% + 20 digit) | |
Frequency measuring range | 2kHz/20kHz/200kHz/2MHz/10MHz | |
Frequency measuring accuracy | ±(1%+10 digit) | |
Temperature measuring range | -20...1000°C | |
Temperature measurement accuracy | ±(1% + 4 digit) | |
Resistance measuring accuracy | ±(0.8%+3 digit) | |
Diode test | 1mA @2V | |
Continuity test | acoustic indication, <70Ω | |
Conform to the norm | CAT III 1000V CAT IV 600V EN 61010 | |
Dimensions (W x H x D) | 201x101x68mm | |
Illumination | yes |
The PEAKTECH P 2005A model is a universal digital multimeter designed for users working with electrical installations as well as in electronics or maintenance fields. Its functionality and measurement range make it equally suitable for use in a service workshop, educational laboratory, and semi-professional applications.
The device meets the overvoltage category requirements of CAT III 1000V and CAT IV 600V, which means safe measurement capability not only in consumer circuits but also in power supply installations – obviously within the limits defined by safety standards. In practice, this translates into greater versatility, especially for electricians and technicians.
The meter's construction is also noteworthy. The casing is double insulated and covered with a flexible rubber layer. This design not only improves resistance to mechanical damage but also provides a firmer grip and greater comfort during work, which is especially important in challenging field conditions.
One of the strongest features of the P 2005A model is the wide range of available measurement functions. The multimeter allows measurement of DC and AC voltage up to 1000V and current up to 10A, with (as in most meters of this class) attention required to appropriate measurement ranges and time limits for the highest current values. The accuracy of DC voltage measurement is about ±0.5%, which is typical for meters in this class.
In the passive measurement range, the device offers the possibility to check resistance up to 2GΩ, allowing analysis of both standard circuits and very high impedance systems. Additional measurements include capacitance (up to 200µF) and inductance (up to 20H, using an adapter – LC/hFE socket) – functions less often found in simple multimeters but useful for diagnosing electronic components.
The multimeter also handles frequency measurement up to 10MHz, enabling signal analysis in basic electronic and service applications. It is important to remember, however, that the maximum frequency applies to signals with appropriate input parameters as specified by the manufacturer’s documentation.
An important functional extension is also the measurement of temperature in the range of -20...1000°C, performed using the included type K thermocouple. This solution is used, among others, in heating device servicing, HVAC systems, and process control.
In addition to basic measurements, the meter also allows:
Such a wide set of functions makes the device suitable as a universal diagnostic tool – both in working with installations and electronics.
It is worth emphasizing that this model uses manual range selection, which is an advantage for many users. It allows faster reaction to changes in the measured signal and provides greater control over measurement than automatic solutions, especially in situations requiring precise diagnostics.
Results are read via an LCD display with a resolution of 3.5 digits (up to 1999 counts). The use of backlighting significantly improves readability in low light, which often proves essential in practice, for example during work in switchboards or technical installations.
The user also has access to the PEAK HOLD function, which allows storing the peak value. This is especially useful for measuring variable or pulse signals.
The multimeter is also equipped with an automatic shutoff that protects the battery from excessive discharge, as well as a low battery indicator.
User ergonomics are also enhanced by design details such as a stable rear stand and holders for test leads, facilitating work in a stationary mode.
Regarding user safety, the key importance lies in the standards met by the meter and the design solutions applied. The P 2005A model works in classes CAT III 1000V / CAT IV 600V, meaning it is resistant to overvoltages occurring in electrical installations (both on the consumer side and closer to the power source).
Double insulation and properly designed measurement inputs minimize the risk of electric shock, while clear markings and an intuitive switch layout facilitate correct operation.
The solid design, described as rugged, means the meter tolerates intensive use well – both in workshops and fieldwork.
The multimeter is powered by a standard 9V battery (type 6LR61 / 6F22), ensuring easy access to power sources and quick replacement when needed.
The set includes a complete range of accessories allowing immediate start of work:
Thanks to the wide range of functions and high safety category, the PEAKTECH P 2005A finds applications in many technical fields. It is suitable for electricians and installers, as well as for diagnostics of electronic circuits or in educational environments.
The inductance measurement and transistor parameter functions make it particularly interesting for electronics professionals and hobbyists alike.
The PEAKTECH P 2005A is a well-equipped and designed digital multimeter that combines a wide range of measurement functions with a solid, safe design. This allows it to serve as a universal tool in daily technical work.
It is a device for users who expect not only basic functions from a meter but also greater flexibility and capability to work in varied conditions.